Axel Joost digital ignition lock Easy RFID new
In contrast to other RFID solutions on the market, this RFID ignition lock does not consume any significant power in standby, so that the battery is spared and the motorcycle starts up even after several months without operation. In addition, 2 load switches for the ignition / peripherals (20 Ampere) and the start relay (3 Ampere) are already integrated, which saves additional parts and minimizes the wiring effort. A small supplied piezo loudspeaker can be connected if required and emits a short acoustic signal when a trained key is detected.
The control works with only one button. A push on the button activates the power supply to the radio module. If a registered electronic key is in the immediate vicinity, the ignition is switched on and a status LED flashes once. The starter can then be activated by pressing the button again. The starter relay is switched off again as soon as the button is released. The ignition remains on until the button is pressed briefly (less than 1/4 second) and the Easy RFID is switched off again. The starter motor can be operated at any time as long as the ignition is on. The Easy RFID can be programmed to various electronic standard keys (125 kHz, EM4100). For this the orange cable is clamped against ground, the key to be learned is held to the Easy RFID and the start button is pressed. A flashing 3 or 4 times indicates that the Easy RFID has read the data from the key and is now accepting for the motorcycle. 2 keys can be read in, so that a lost key is no problem. The maximum range is approx. 6-8 cm depending on the key used and the mounting position. 2 threaded bolts allow secure attachment to the bike. 2 keys (1 chip, 1 card) are included in the delivery.
Dimensions: Steer. 40 mm x 25 mm x 12 mm, antenna D 29 mm x 19mm
power consumption in standby mode: maximum 30 uA
housing: black ABS, encapsulated with 2-K potting compound
input voltage: 9 - 16 Volt
connections: Control part 0.14 mm², power part 1.5 mm², each 20 cm length
Maximum range to key: Approx. 6 - 8 cm, depending on key and installation position
Maximum ambient temperature: 60 degrees Celsius
Admissible current from 12 V connection: 20 Ampere continuous current for ignition, 3 Ampere to start relay
br/>Note: Please note that the Easy RFID may only be installed by appropriately trained service technicians.
Browse to discover the best motorcycle Mirrors collection ...
In addition to complete custom motorcycle exhaust systems, you will also find a selection of header pipes, exhaust heat shields, DIY ...
Wide selection of motorcycle grips for your chopper, bobber, cafe racer or custom motorcycle.
Here you can find mini motorcycle turn signals, motorcycle LED turn signals, motorcycle turn signals with incandescent lamps, relays and resistors.
Find out our selection of motorcycle headlights and headlight kits.
Find a huge range of motorcycle rear & tail lights from highsider, ShinYo, Kellerman...
Standard and customised motorcycle instruments for OE manufacturers end users
Get the comfort and style that you deserve with a new Motorcycle Seat.
Rear sets are another great way to make your cafe racer more serious. Sets like these will allow for a much more comfortable riding position if you plan to lay low
Shop all the best brands & styles of Full Face Motorcycle Helmets here
It's important to keep your motorcycle battery in tip-top condition; but especially important during the colder months as poor weather can take it's toll on your ...
Custom parts for Triumph Bonneville
Custom parts for BMW R9T
Roadster / Scrambler / Pure / Racer / Urban GS
Custom parts for BMW R 850/1100/1150 GS
The BMW K100 is a family of four-cylinder 987 cc motorcycles that were manufactured by BMW from 1983 to 1992...
KIT will transform your Ducati Scrambler into a go-anywhere machine.
The Suzuki SV650 and variants are street motorcycles manufactured since 1999 for the international market by the Suzuki Motor Corporation, featuring a ...