Acewell ACE-MA085 KM/H

The Acewell motorcycle speedometer from the ACE-MA085-214/264 series is a round instrument with a classic needle speed display.

More functions:

• Needle speedometer with shift light
• digital speed display up to 399.9 km/h
• Gear display is taken from the engine speed and speedometer and can be switched off via OFF mode
• Shift light with 3 different colors
• Scroll function of the second display line adjustable from 1-20 seconds or OFF mode
• 8 LED indicator lights
• Gear display up to 8 gears, neutral, reverse gear and off mode possible
• 2 temperature displays for oil, water or outside temperature with additional warning LED display for overheating - sensors included!
• Digital speed display up to 19,900 rpm
• Bar tank display adjustable resistance range from 0 to 990 ohms, or OFF mode
• Battery monitoring adjustable from 11.0 to 15.0 volts, reports over/undersupply
• Maintenance reminder function, can be entered in hours or KM
• When new, the total mileage can be freely adjusted for the first 30 km - after that not anymore
• Universal wheel circumference adjustment range: 1-3999mm
• Decrease of the speed from the original sensor possible.
• The end user is able to display the speed display with or without a decimal point.
• Background color selectable from the display in 3 colors. (Blue,Green,Amber)
• Water-resistant IP 67 and extremely water, vibration and shock resistant (8G vibration, 100G shock tested)
• E-certified
• ABE

Digital display of

• Trip counters TRIP 1 + 2
• total mileage
• Digital speed display up to 19,900 rpm
• Average and maximum speed display
• Average and maximum speed display
• Temperature - additional storage of the maximum temperature reached
• gear indicator
• fuel gauge
• time
• voltmeter
• driving time
• hour meter
• Adjustable shift warning with LED display

Scope of delivery:

• Speed ​​sensor with magnet
• Temperature sensor (P 1/8")
• air temperature sensor
• fastening material
• Cable set with waterproof connectors and heat shrink tubing
• German installation instructions with circuit diagram
• ABE

Specifications:

• Needle tachometer 250-6,000-15,000 rpm * 250 rpm
• Digital tachometer 10-19,900 rpm 10 rpm
• Shift warning 100-19,900 rpm 100 rpm
• Speedometer 2.4-399.9 km/h 0.1 km/h ±1%
• Digital temperature display T1 +50°C - +180°C
• Max. temperature +50°C - +180°C
• Bar fuel gauge +/- 0-990 ohms or off 7 bars
• Daily kilometers 1&2 0 - 9999.9 km 0.1 km ±0.1%
• Total kilometers 0 - 999999 km 1 km ±0.1%
• Top speed 2.4-399.9 km/h 0.1 km/h
• Average speed 2.4-399.9 km/h 0.1 km/h
• Driving time RT 0:00'00'' - 99:59'59'' 1 second ± PPM
• Total time TT 0:00' - 9999:59' 1 minute ±50PPM
• Time 0:00'00'' - 23:59'59'' 1 second/1 minute ±50PPM
• Voltmeter 8.0-25.0 volts 0.1 volts
• Supply voltage: 12V DC voltage
• Tachometer input signal CDI, transistor ignition or ignition coil
• Speed ​​sensor: reed or hall sensor
• Temperature sensor thermal sensor P 1/8"
• Wheel circumference adjustment: 1mm - 3999mm (1mm increments)
• Operating temperature: -20°C. - +80°C. (inside the housing)
• Storage temperature: -30°C. - +90°C. (inside the housing)
• *Needle speed display selectable !see table

Dimensions:

• Outer diameter, bore and depth: 95.0mm Ø, 85.0mm Ø and 56.1mm

With the exception of the clock, all setting values, time and kilometer counters are retained when the power is off. This means that operation on battery-free motorcycles with a DC power supply is also possible. The clock can be operated with a 9V block battery.

Note for BMW customers:

For a simple conversion we recommend the following items:

• SW10043 or ACE-TA7 : electronic speedometer cable for 2V Boxer
• SW10346 or ACE-IVR03 Led Inverter, needed to charge the battery.
• SW10052 ACE-IHO instrument holder, for the Classic series if necessary.

Installation instructions: The rubber pads supplied are damper rubbers! Please do not overtighten, otherwise the cushioning effect will be lost.